Pitch divider systems allows the playing surface to be divided up into sections. Designed to be installed outside of the perimeter fence and can hang netting with minimal sag over a span of up to 63m.
- 100mm square posts manufactured from 4mm galvanised steel that are polyester powder coated green, other colours available POA
- Winch post is fitted with a high specification brake winch and top pulley wheel
- Dummy post complete with pulley wheel and cleat
- Winch has enclosed gears for added safety, detachable handle and a maximum load rating restricted to 100kg
- Available in the heights shown below
Pitch divider posts must be installed in a minimum 1 metre cube of concrete, consult a construction engineer for advice where required. The posts are designed to be concreted directly in the ground but ground sockets can be supplied seperately at an additional cost
All prices exclude VAT and carriage
2.7m Winch Type Divider Posts
Unit: Set (2)
Cat. No: fbl-107
* If ordering from outside of the UK mainland or from Scotland or Wales please call 0800 195 1943 for an individual carriage price.
3.0m Winch Type Divider Posts
3m high. Weight 80kg each
Unit: Set (2)
Cat. No: fbl-108
* If ordering from outside of the UK mainland or from Scotland or Wales please call 0800 195 1943 for an individual carriage price.
3.6m Winch Type Divider Posts
3.6m high. Weight 95kg each
Unit: Set (2)
Cat. No: fbl-109
* If ordering from outside of the UK mainland or from Scotland or Wales please call 0800 195 1943 for an individual carriage price.
Spare 91cm socket for 100mm square posts
914mm deep socket with a 103mm internal diameter
26kg per socket
Unit: Each
Cat. No: bas-045
* If ordering from outside of the UK mainland or from Scotland or Wales please call 0800 195 1943 for an individual carriage price.
