NB: for multiple or quantity orders, please call for reduced carriage charges
If ordering from outside of the U.K mainland or from
3G Aluminium Portagoal
The Aluminium Portagoal must be anchored as per our instructions to conform to BSEN 748.
Includes 2 x PEG-021 for anchoring on grass. (Risk assessment required prior to use on grass).
Made from 102mm x 112mm x 2.5mm thick reinforced aluminium.
Complete with new design International Back Support and improved diagonal braces made from 31.8mm x 1.5mm thick galvanised steel for added strength.
For anchoring on synthetic/hard surface 6 x ANC-007 are required.
For hard surfaces see the Anchors section.
Complete with 100 unique lock on synthetic net hooks.
Stainless steel bolts, fully powder coated white.
Corner joint and extruded section as Euro Goal.
3G Mini Soccer goals
- Uprights and crossbar manufactured from 102mm x 112mm x 2.2mm thick reinforced aluminium
- Welded crossbar/ upright corner joints provide added strength and aesthetic appearance
- Zinc plated steel fixing plate incorporating corner net retaining clamp
- Polyster powder coated white
- Micro adjustable foot on each upright allow exact upright height
- 460mm deep elliptical sockets complete with drop-in socket lids and wedges for holding posts firmly in the socket
- Complete with 50 net hooks per goal
All prices exclude VAT and carriage
Integral Weighted Portagoal
Alumimium Integral Weighted Portagoals
Self weighted portagoal, complies with BS 8462 safety standards with out the need for seperate anchorage Backbar consists of individual galvanised steel rollers and one supporting axle
Folding Aluminium 7-A-Side Goals
4.88m x 1.83m. New design corner joint. Sprung loaded folding side frame for ease of use and storage. Will not fold whilst in use. Strong, durable high quality matchplay and training goals. 80mm diameter x 2.5mm thick reinforced aluminium crossbars and uprights. Complete with 32mm x 3mm thick aluminium full back supports. Internal 8mm thick steel corner joints. Unique lock-on synthetic net hooks. Supplied with 4 x ‘U’ style ground anchors per set. All external bolts are stainless steel.. Total weight 52kg (Set of 2).
Classic Mini Soccer
Designed for outdoor use
Available in 4.88m x 1.83m and 3.66m x 1.83m
(weights not included)
Fixed Type Aluminium 7-A-Side Posts
Non Folding Fixed Type (Same spec. as Folding type) Galvanised steel bottom back bar for increased lateral support.. 4.88m x 1.83m. Total weight 58kg (Set of 2).
76mm Round Super Heavyweight Goals
- Uprights and crossbars are manufactured from 76mm diameter x 3mm thick steel
- Polyester powder coated white
- Complete with four 460mm deep sockets and lids with 80mm - diameter internal measurement
- Sockets are designed to allow uprights to sit 313mm into socket
- All external bolts are stainless steel
Freestanding Steel 7-A-Side Posts
Permanent fixed type (Same spec. as Folding type) Corner brace for added strength.4.88m x 1.83m and 3.66m x 1.83m. Total weight 66kg (Set of 2).
All prices exclude VAT and carriage
Aluminium Fence Folding Mini Soccer Goals
NEW Aluminium Fence Folding Mini Soccer Goals.comes in :-
4.88m x 1.83m projection goal 2.3m to 3.5m
3.66m x 1.83m projection goal 2.3m to 3.5m
4.88m x 1.83m projection goal 3.5m to 5m
3.66m x 1.83m projection goal 3.5m to 5m
All prices exclude VAT and carriage
60mm Round Heavyweight Goals
- Uprights and crossbars are manufactured from 60mm diameter x 54mm thick steel
- Polyester powder coated white
- Complete with four 460mm deep sockets with 65mm diameter internal measurement
- Sockets are designed to allow uprights to sit 308mm into socket
- All external bolts are stainless steel
All prices exclude VAT and carriage
Super Heavyweight Goals with Locking Uprights
Specification as per super heavyweight goals but with a bayonet locking method to ensure that unauthorised persons cannot remove posts without unbolting the crossbars. This method of locking the uprights into the sockets can only used on new installation as a special socket is required
All prices exclude VAT and carriage
Folding Steel Mini Soccer Goals
- Uprights and crossbars are manufactured from 50.8mm diameter x 2.6mm thick steel
- Polyester powder coated white
- Complete with 32mm x 1.5mm thick galvanised steel full back supports
- Sprung loaded folding side frame for ease of use and storage,Complete with detachable 42.4mm diameter x 3.2mm galvanised steel bottom backbar
- Complete with four "U" peg anchors
7-A-Side Elbow Bracket
Made from 25.4mm x 1.6mm thick tubular Galvanised steel.. Total weight 3kg. per set of 4.
Poly Goal 7-A-Side Goal
This new and improved freestanding goal is lightweight and can be easily assembled and dismantled
- Size 3.66m wide x 1.83m high x 1.22m runback
- Manufactured from 68mm diameter heavy duty white PVC
- Complete with a 2.5mm net. three "U" peg anchors, net reatining clips and carry bag with zip
- Joins together using PVC button clips to ensure stablilty
- Bag is complete with central carry straps, when packed , bag measures 133cm x 32cm x 32cm
Supa 7 Goal
Ideal for teams who need to transport goals to and from the pitch. Each goal can be assembled in under 15 minutes
3.66m wide x 1.83m high x 1.5m runback
Lynx Supergoal
All Supergoals contain ground anchoring systems, nets and carrying bags. Designed specifically to be quickly assembled on site, these superbly engineerd goals conform to BS 8465. Supergoals are made from lightweight aluminium parts that lock together with button clips
Cougar Supergoal
All Supergoals contain ground anchoring systems, nets and carrying bags. Designed specifically to be quickly assembled on site, these superbly engineerd goals conform to BS 8465. Supergoals are made from lightweight aluminium parts that lock together with button clips